How to create a multilingual site in Joomla 3.x.
Multilingual support in websites opens them up to a considerably larger audience than a single-language site might be able to. Developing a site with multilingual support takes a little know-how, and we have put together this guide to help you get through it.
Everything written here can be applied to any of the templates provided by RocketTheme.
NOTE: This process is much easier when it is being done on a new website. You can accomplish this on an existing site using the same steps, but you may need to work a lot harder during menu configuration to achieve the desired result.
First thing that you should do is to install additional languages that will be used on the web site. You can do this by navigating to Extensions Manager -> Install Languages, selecting the language(s) you wish to install, and clicking the yellow Install button in the upper-right area of the page.
When you installed all the required languages go to Language Manager which can be reached by going to Administrator -> Extensions -> Language Manager. On the Installed - Site tab, you will see the list of all installed languages on the web site. Now, we just need to add content languages.
You can do this by selecting the Content tab and then selecting New. This will take you to a page that enables you to set up a new content language for your site.
Fill out the required information in this page. This information includes:
NOTE: A lot of this information can be found on the Installed Languages page in the Language Manager. The Language Tag should be an exact match to what appears on this page.
Once you have filled in this information, click Save and Close. This will take you back to the Content Languages page where you will see your new language(s) listed along with any pre-existing content languages.
The next step requires you to navigate to Extensions -> Plug-in Manager in order to configure Joomla multilingual plugin. The plugin you need to find here is System - Language Filter. This plugin enables the CMS to recognize various installed languages and filter content so what is displayed matches the language selected.
Click the plugin to access the configuration page. Here, you can set the Basic Options as you see fit. Here are some example settings which should work in most cases.
|Language Selection for New Visitors||Browser|
|Automatic Language Change||Yes|
|Remove URL Language Code||Yes|
|Add Alternate Meta Tags||No|
Once this is configured, activate the plugin by switching the Status to Enabled.
The next step is to create a new category for each language you wish to use. You can do this by navigating to Administrator -> Content -> Category Manager -> Create New Category.
Each category should have a language assigned. You can title this category after the name of the language you intend to use. Once you have done this, you can click Save and Close.
You can then create content categories and assign their Parent category to the base category you have created for the language. For example, you can create a category called Blog and assign it the English category as a parent.
At this point, you will want to create content for each category, if only so that you can test this configuration while creating menus and other upcoming steps. Give each subcategory for each language at least one article.
NOTE: Each of these articles should have the appropriate Language assigned to it, even if you are placing it in a language-specific content category.
Let us say you have a copy of an article for each language. You can assign these using the Associations area of the article editor. For example, if you have a single article that would act as your language-specific home page, these should all be associated with each other here.
The next thing you may want to do is to navigate to the Global Configuration page and access SEO Settings. This area of the administrator can be accessed by navigating to Administrator -> Site -> Global Configuration.
You will likely want to turn on Unicode URL aliases, especially if you have special characters in one of the selected language, for example letter 'čćšđž' in the Croatian language.
In order for everything to work and look correctly, you will want to add menus that belongs to each language in Menu Manager. This step will enable each user to not only access a menu that is available in their preferred language, but also to filter the site experience itself by content language.
You can add a new menu by navigating to Administrator -> Menus -> Menu Manager -> Add New Menu.
Once you have created the menu, you can then go into that menu's Menu Manager page, filter menu items by one of the language-related menus, and select New.
When you create the new menu item, you can do so as you would normally. The only additional steps required is that you set the Menu Location and Language to your desired language-specific menu and language. You need to create a home page/default page menu item for each individual language in order for the Language Switcher (Step #8) to work properly.
One thing that you need to set (if you want specific article for example to change depending on selected language) is Menu Item Associations section's parameters. This needs to be done the same way you did the earlier article associations.
Later on we will be using the Language Switcher module to provide language buttons on our front end. To have our site seamlessly transition from one language to another we have to set "Associations".
For a given language menu page and given language article content we have to "associate" what menu items and articles should appear for any of the other languages when selected by the user.
Let us say your site will use English and Italian. The frontend will have the three language buttons and we want to make sure the right menu page and article appears when the user selects a language.
Here is the menu structure:
Here are the language articles:
So we will setup our English Menu first. In the Home page item click on the Associations tab and you will see one or more language options with a corresponding dropdown boxes. In the case of our example, you will see three since there are three other languages in addition to the one the category/article is presently assigned.
We will focus on Italian settings in this example, but the same principal applies to any and all additional languages.
For Italian you would select the "Casa" menu item. When the user clicks the Italian language button this would be the menu page the user would land on.
Now lets set what article content should appear when the user selects a different language. So we will setup our English "Article one" first. In the Article Editor item click on the Associations tab and you will see two language options with a corresponding dropdown boxes.
For Italian you have three choices: L'articolo uno, Articolo due and Articolo tre. Here you would probably select L'articolo uno as the article to replace the English Article one when the user clicks the Italian language.
This will enable you to switch seamlessly between languages on the frontend. After building all of the default pages, simply go back and associate them with their equivalent article on opposing pages using the Associations tab. When this is done, the menu item should appear like this:
At the end, you have to assign template copy for each language installed. That is necessary so you can load different menus, depending on the selected language. You can do this by going to Administrator -> Extensions -> Template Manager, selecting the template you have as default, and selecting Duplicate.
This will create a duplicate of your template, which you can modify to include the language-specific menu and set assign a language to the override.
To do this, you will want to set the Default language to the language you wish to have this style assigned. You can do this in the Overview area of the Template Settings.
Next, you will want to change the main menu to the one you created for the language. For example, if this template style is assigned to English (USA), then you will want to select the English (USA) menu.
This step is useful if you want to give your visitors the option to switch between languages as they please. You can do this by creating a Language Switcher module and publishing it on the page.
You can do this as you would create any other module. By navigating to Administrator -> Extensions -> Module Manager and selecting New. Choose Language Switcher as the Module Type and configure it as you prefer.
Once this is done, you should see both the language selector module and the language-specific menu appear as expected. Your visitors can switch between languages by clicking its associated flag.
If you're having issues with your multilanguage setup working properly, the first thing you should do is to enable the Multilanguage Status Administrative Module. This is a back end module that will run a series of checks against your setup and advise on any corrections that need to be made.
To enable it you go to Extensions > Module Manager > (change the dropdown from **Site to Administration to show the admin modules) > Enable** (publish) the Multilanguage Status Module. You should now see a link named Multilanguage Status in the position you published it in.