Quasar 16 Column
-
-
- Vikram Rao
- Rocketeer
- Posts: 93
- Thanks: 0
- Consultant
-
How can we change to a 16 columns layout.
I did see this thread by Andy http://www.rockettheme.com/forum/index.php?f=337&t=98164&rb_v=viewtopic#p495291
But did not get it all right.
Steps I followed :
1. In gantry.config.php file changed
fromto$gantry_default_grid = 12;
$gantry_default_grid = 16;
2. Copied contents of templateDetails.16grid into templateDetails.xml file
3. Changed in gantry.class.php
fromtovar $default_grid = 12;
var $default_grid = 16;
Still didn't get it working. Am I missing something here? Are there any more steps required to be performed?
Kindly help. - Vikram Rao
http://www.vikramrao.com
-
-
-
- Henning
- Preeminent Rocketeer
- Posts: 29362
- Thanks: 954
- Volunteer
-
Afaik to change the Grid from 12 to 16 you have to do only TWO steps:
1. in templateDetails.xml change
<param name="grid_system" type="hidden" default="12" />
to
<param name="grid_system" type="hidden" default="16" />
2. add to gantry.config.php in the template folder ...
$gantry_default_grid = 16;
and clear your joomla+gantry-cache
No copying or changing in gantry.class.php
Edit: I just tested this on Quasar & Crystalline: It's really just the two steps and nothing more.
Just be sure to save you changes! Frankly I don't know what Andys post was about ..
-
-
-
- Vikram Rao
- Rocketeer
- Posts: 93
- Thanks: 0
- Consultant
-
Hey Henning
Thanks for a quick suggestion but.......This is still not working. Still shows as 6 module positions. Ideally it should show 8 module positions.
Can you kindly help?
Henning wrote:Afaik to change the Grid from 12 to 16 you have to do only TWO steps:
1. in templateDetails.xml change
<param name="grid_system" type="hidden" default="12" />
to
<param name="grid_system" type="hidden" default="16" />
2. add to gantry.config.php in the template folder ...
$gantry_default_grid = 16;
and clear your joomla+gantry-cache
No copying or changing in gantry.class.php
Edit: I just tested this on Quasar & Crystalline: It's really just the two steps and nothing more.
Just be sure to save you changes! Frankly I don't know what Andys post was about .. - Vikram Rao
http://www.vikramrao.com
-
-
-
- Henning
- Preeminent Rocketeer
- Posts: 29362
- Thanks: 954
- Volunteer
-
You are misunderstanding gantry:
There are always only max. 6 positions.
Just the basic grid changes from 12 to 16
The 12 column layout consists of 12 column grid has 12 available columns each of 60px width, with a 10px gutter on each side. The 16 column version consists of 16 columns of 40px, again with a 10px gutter on each side.
Changing from 12 to 16 gives more layout-options - but not more mod-positions ...
-
-
-
- Andy Miller
- Preeminent Rocketeer
- Posts: 9919
- Thanks: 96
- Web Kahuna
-
the all important change is the $gantry_default_grid variable, however, if you don't change the positions elements as I outlined in my original post, you won't really be taking advantage of all the new possible combinations.
For example, in the 12 column grid, if you have 2 positions, you can do a 2,10 combination, because the 'words' range from 2 to 10. This allows you to have a thin but usable column of 2 grids, and a large 10 grid column.
Now if you switch the grid variable to 16, and try to configure 2 columns, you can only update the columns to 6,10. You cannot make the side column narrower because the words have not been updated to support, 11,12,13, etc. When you add those, as I indicated in the original post you would be able to do a 3,13 combination and again have a thin but usable column of 3 and a large column of 13.
See i do know what i'm talking about
-
-
-
- Vikram Rao
- Rocketeer
- Posts: 93
- Thanks: 0
- Consultant
-
Hey Andy thanks for the details. I shall work around this.
Regards
Andy Miller wrote:the all important change is the $gantry_default_grid variable, however, if you don't change the positions elements as I outlined in my original post, you won't really be taking advantage of all the new possible combinations.
For example, in the 12 column grid, if you have 2 positions, you can do a 2,10 combination, because the 'words' range from 2 to 10. This allows you to have a thin but usable column of 2 grids, and a large 10 grid column.
Now if you switch the grid variable to 16, and try to configure 2 columns, you can only update the columns to 6,10. You cannot make the side column narrower because the words have not been updated to support, 11,12,13, etc. When you add those, as I indicated in the original post you would be able to do a 3,13 combination and again have a thin but usable column of 3 and a large column of 13.
See i do know what i'm talking about - Vikram Rao
http://www.vikramrao.com
-
Time to create page: 0.110 seconds